MAMMUT Wall Sandwich Panel

This kind of MAMMUT sandwich panels are 4 to 6 cm thick and are mainly used as walls in workshops, offices and buildings as well as indoor partitions.
It is comprised of insulated polyurethane foam with a density of 40 kg/m3 injected between double-sided sheet metals in different configurations.(two sides of Aluzinc, two sides of galvanized sheets and one side Aluzinc/one side galvanized sheet. The strength of the product is increased into an optimum level because of a groove both surfaces.
This product is designed so that they overlap each other while installation and is fixed to the structure in various situations using screws. (as shown below)

Models: Straight (DNS) - Grooved (DND) - Hidden Screw (RPO)
Thickness: 4, 5, 6, 8, 10, 12 and 15 cm
Width: 1.16 m (with 2 centimeters of overlap)
Length: 1 to 13 m as per customer need

Product main features are:
Resistant to electricity & chemicals
Resistant to heat transfer
Resistant to humidity
Non-flammable

Structural Performance of Wall Sandwich Panel:
Sandwich panels used in walls are exposed to wind pressure so that the amount of this pressure as well as installation distances must be determined prior to design. Additionally one should be familiar with the form coefficients of the building exposed to local and general pressures and comply with concerning regulations.

Trapeziums model:
Thickness: 4, 5, 6, 8 and 10 cm
Width: 1.08 m (7 cm overlap)
Length: 1 to 13 m as per customer need

Roof Ceramic model:
Length: 1.22 to 7.015 m (multiplies of 30.5 cm)